cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com type ss 85 oc sub-miniature aluminum elect rolytic capacitors radial leaded, general purpose aluminum electrolytic type ss is a sub-miniature radial leaded aluminum electrolytic capacitor with a +85 oc, 1000 hour long life rating. the ss has a small size and is ideal for high density packaging applications. highlights sub-miniature +85 oc great for high density packaging available in t&r and ammo pack ? ? ? ? speci?cations capacitance range: voltage range: capacitance tolerance: operating temperature range: dc leakage current: ripple multipliers for voltage and temperature : dissipation factor @ 120 hz, +2 0 oc: load life test: shelf life: 0.1 to 100 f 6.3 to 63 vdc 20% C40 oc to +85 oc after 2 minutes, +25 oc at rated voltage i = .01cv or 3 a max, whichever is greater c = capacitance in (f) v = rated voltage i = leakage current in a rated ripple multipliers wvdc 60 hz 120 hz 1 khz 6 to 25 0.85 1.0 1.10 35 to 63 0.80 1.0 1.15 ambient ripple temperature multiplier +85 oc 1.00 +75 oc 1.14 +65 oc 1.25 apply wvdc for 1,000 hours at +85 oc capacitance change within 20% of initial limit d c leakage current meets initial limits esr 200% of initial value 1000 hrs with no voltage applied cap change within 20% of initial values dc leakage meets initial requirement df 200%, meets initial requirement outline drawing dimensions in (millimeters) for capacitors whose capacitance values exceed 1000 f, the value of df (%) is increased 2% for every additional 1000 f wvdc 6.3 10 16 25 35 50 63 df (%) 24 20 16 14 12 10 10 m allo r y ss l s 0.5 15 min. d 5 + pvc sleeve d 0.05 + - vinyl sleeve adds .5 max. to diameter and 2.0 max. to length. case vented on diameters 6.3 and greater. radial leaded, general purpose aluminum electrolytic type ss is a sub-miniature radial leaded aluminum electrolytic capacitor with a +85 oc, 1000 hour long life rating. the ss has a small size and is ideal for high density packaging applications. highlights ? sub-miniature ? +85 oc ? great for high density packaging ? available in t&r and ammo pack specifcations capacitance range: voltage range: capacitance tolerance: operating temperature range: dc leakage current: ripple multipliers for voltage and temperature: dissipation factor @ 120 hz, +20 oc: load life test: shelf life: 0.1 to 100 f 6.3 to 63 vdc 20% C40 oc to +85 oc after 2 minutes, +25 oc at rated voltage i = .01cv or 3 a max, whichever is greater c = capacitance in (f) v = rated voltage i = leakage current in a rated ripple multipliers wvdc 60 hz 120 hz 1 khz 6 to 25 0.85 1.0 1.10 35 to 63 0.80 1.0 1.15 ambient ripple temperature multiplier +85 oc 1.00 +75 oc 1.14 +65 oc 1.25 apply wvdc for 1,000 hours at +85 oc capacitance change within 20% of initial limit d c leakage current meets initial limits esr 200% of initial value 1000 hrs with no voltage applied cap change within 20% of initial values dc leakage meets initial requirement df 200%, meets initial requirement outline drawing for capacitors whose capacitance values exceed 1000 f, the value of df (%) is increased 2% for every additional 1000 f wvdc 6.3 10 16 25 35 50 63 df (%) 24 20 16 14 12 10 10 cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com type ss 85 oc sub-miniature aluminum electrolytic capacitors
part numbering system ss 100 m 63 s t capacitance rated lead type capacitance tolerance voltage packaging confguration (f) (%) (vdc) ss 1r0 = 1 m = 20 6r3 = 6.3 a = tape & ammo 1 = lead cut 100 = 10 063 = 63 e = different characteristic 2 = lead form 101 = 100 r = tape & reel 4 = lead crimp & cut (form) 102 = 1000 s = standard t = standard ratings max esr max ripple catalog 120 hz 120 hz size in. (mm) cap part number +25 oc +85 oc diameter length lead space lead dia. (f) () (ma) (d) (l) (s) (d) 6.3 vdc (8 volts surge) 22 ss220m6r3st 14.48 34 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 33 ss330m6r3st 9.65 42 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 47 ss470m6r3st 6.78 50 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 100 ss101m6r3st 3.18 77 .248 (6.3) .276 (7.0) .098 (2.5) .0197 (0.50) 10 vdc (13 volts surge) 22 ss220m010st 12.06 38 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 33 ss330m010st 8.04 47 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 47 SS470M010ST 5.65 59 .248 (6.3) .276 (7.0) .098 (2.5) .0197 (0.50) 100 ss101m010st 2.65 80 .248 (6.3) .276 (7.0) .098 (2.5) .0197 (0.50) 16 vdc (20 volts surge) 10 ss100m016st 22.56 29 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 22 ss220m016st 10.25 44 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 33 ss330m016st 6.84 57 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 47 ss470m016st 4.80 68 .248 (6.3) .276 (7.0) .098 (2.5) .0197 (0.50) 25 vdc (32 volts surge) 4.7 ss4r7m025st 42.35 24 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 10 ss100m025st 19.9 33 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 22 ss220m025st 9.05 51 .236 (6.0) .276 (7.0) .098 (2.5) .0197 (0.50) 33 ss330m025st 6.03 63 .236 (6.0) .276 (7.0) .098 (2.5) .0197 (0.50) 47 ss470m025st 4.23 71 .248 (6.3) .276 (7.0) .098 (2.5) .0197 (0.50) cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com type ss 85 oc sub-miniature aluminum electrolytic capacitors
ratings ss 100 m 63 s t capacitance rated lead type capacitance tolerance voltage packaging confguration (f) (%) (vdc) ss 1r0 = 1 m = 20 6r3 = 6.3 a = tape & ammo 1 = lead cut 100 = 10 063 = 63 e = different characteristic 2 = lead form 101 = 100 r = tape & reel 4 = lead crimp & cut (form) 102 = 1000 s = standard t = standard max esr max ripple catalog 120 hz 120 hz size in. (mm) cap part number +25 oc +85 oc diameter length lead space lead dia. (f) () (ma) (d) (l) (s) (d) 6.3 vdc (8 volts surge) 22 ss220m6r3st 14.48 34 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 33 ss330m6r3st 9.65 42 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 47 ss470m6r3st 6.78 50 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 100 ss101m6r3st 3.18 77 .248 (6.3) .276 (7.0) .098 (2.5) .0197 (0.50) 10 vdc (13 volts surge) 22 ss220m010st 12.06 38 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 33 ss330m010st 8.04 47 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 47 SS470M010ST 5.65 59 .248 (6.3) .276 (7.0) .098 (2.5) .0197 (0.50) 100 ss101m010st 2.65 80 .248 (6.3) .276 (7.0) .098 (2.5) .0197 (0.50) 16 vdc (20 volts surge) 10 ss100m016st 22.56 29 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 22 ss220m016st 10.25 44 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 33 ss330m016st 6.84 57 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 47 ss470m016st 4.80 68 .248 (6.3) .276 (7.0) .098 (2.5) .0197 (0.50) 25 vdc (32 volts surge) 4.7 ss4r7m025st 42.35 24 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 10 ss100m025st 19.9 33 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 22 ss220m025st 9.05 51 .236 (6.0) .276 (7.0) .098 (2.5) .0197 (0.50) 33 ss330m025st 6.03 63 .236 (6.0) .276 (7.0) .098 (2.5) .0197 (0.50) 47 ss470m025st 4.23 71 .248 (6.3) .276 (7.0) .098 (2.5) .0197 (0.50) max esr max ripple catalog 120 hz 120 hz size in. (mm) cap part number +25 oc +85 oc diameter length lead space lead dia. (f) () (ma) (d) (l) (s) (d) 35 vdc (44 volts surge) 4.7 ss4r7m035st 33.88 24 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 10 ss100m035st 15.92 36 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 22 ss220m035st 7.24 57 .248 (6.3) .276 (7.0) .098 (2.5) .0197 (0.50) 50 vdc (63 volts surge) 0.10 ssr10m050st 1326.96 1 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 0.22 ssr22m050st 603.17 2 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 0.33 ssr33m050st 402.11 3 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 0.47 ssr47m050st 282.33 5 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 1.0 ss010m050st 132.70 10 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 2.2 ss2r2m050st 60.32 19 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 3.3 ss3r3m050st 40.21 24 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 4.7 ss4r7m050st 28.23 29 .157 (4.0) .276 (7.0) .079 (2.0) .0180 (0.45) 10.0 ss100m050st 13.27 44 .197 (5.0) .276 (7.0) .079 (2.0) .0197 (0.50) 63 vdc (79 volts surge) 0.10 ssr10m063st 1061.57 1 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 0.22 ssr22m063st 482.53 2 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 0.33 ssr33m063st 321.69 4 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 0.47 ssr47m063st 225.87 6 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 1.0 ss010m063st 106.16 13 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 2.2 ss2r2m063st 48.25 21 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 3.3 ss3r3m063st 32.17 26 .157 (4.0) .276 (7.0) .059 (1.5) .0180 (0.45) 4.7 ss4r7m063st 22.59 33 .248 (6.3) .276 (7.0) .098 (2.5) .0197 (0.50) parts highlighted in yellow are obsolete cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com type ss 85 oc sub-miniature aluminum electrolytic capacitors
notice and disclaimer: all product drawings, descriptions, specifcations, statements, information and data (collectively, the information) in this datasheet or other publication are subject to change. the customer is responsible for checking, confrming and verifying the extent to which the information con - tained in this datasheet or other publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without any guaran - tee, warranty, representation or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on the knowledge that the cornell dubilier company providing such statements (cornell dubilier) has of operating conditions that such cornell dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa - tion regarding any such matter C and cornell dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by cornell dubilier with reference to the use of any cornell dubilier products is given gratis (unless otherwise specifed by cornell dubilier), and cornell dubilier assumes no obligation or liability for the advice given or results obtained. although cornell dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi - cated in such warnings, cautions and notes, or that other safety measures may not be required. cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ? www.cde.com type ss 85 oc sub-miniature aluminum electrolytic capacitors
|
